Wednesday, 26 March 2014

Historic/Modern Photo Mosaics: A how-to guide

This technique allows you to juxtapose historic images with one's you've taken to highlight changes in landscape, architecture, people, etc. I've used the technique to show the changes in boom and bust industry, focusing on a local industrial site that has seen over a century of industrial use. Now it's largely a wasteland. Here's an example of a type of mosaic you can create with this technique:


Dividing the images into strips and alternating strips from each photo, you can allow both images to materialize in the same frame, and in an artistic manner too. The image above shows construction at the industrial site in 1961 and a pile of concrete rubble in 2014—just one example of a theme that can be juxtaposed, construction/demolition.

Here are some tips to get you started developing this sort of mosaic:

  1. Think about a message you might want your mosaic to convey. Consider different themes. Looking through historic photographs first might be a good place to start so you can see what's out there on you topic of interest. Then you can take photos accordingly. Check out online archives of historic photographs or visit your local library to see if they have a collection—grandparents are a good resource too. I found this photo of the industrial site at my local library:
  2. Take photos that might juxtapose your historic image nicely. If possible, try to replicate the original shot by taking a photo from the same vantage point, angle, time of day, etc. This technique can create a very powerful image. Alternatively, take photos that might intertwine with the old one nicely because of their subject matter or try to mimic lines or patterns. The photo below follows a content theme but also has continuous lines (the power lines follow the top of the building):
  3. Once you have a historic photo and a photo of your own that are to your liking, adjust the size and dimensions of both to make them the same (cropping might be necessary). This can be done in various photo editing programs—I used Preview. Choose a style of mosaic you would like to create: alternating vertical strips, alternating horizontal strips, checkerboard, etc. Find a style that suits your photos best. Then crop each photo into strips/squares accordingly and paste them in another program such as Powerpoint. Play around with different widths, sizes, and placements of the strips/boxes. Think about what aspects of each image you especially want to display as some sections will be cut out. You want both images to display enough of their content to be clear. Also, consider colors for this; if the historic photo is black and white, keep your photo in color so the two are distinct.
  4. Arrange your image sections. Be precise. Make sure things line up and have consistent spacing. Consider leaving a slight gap between the sections. Play around with the placement of the strips/squares. As each photo can stand alone, the strips of one photo don't necessarily need to line up with the strips of the other. In a couple of the mosaics above, the photos are offset. This allows you to line content up in a compelling way.
  5. Finally, these guidelines are really more like suggestions. Don't follow the rules. Try different things. I've only used a couple techniques here but there's a lot more to mess with. This is just a jumping off point. Try making your own mosaic in your own style.
Happy photo editing.

Sports Photography for…

A guide to getting really, really ridiculously good looking photos


Before you pick up the camera...

Are you looking for a cool action shot? Perhaps an image of a dirt bike in mid air, frozen 30 feet above the ground, or a football player caught in a touchdown dive a yard from the end zone. Or, you could be looking for a close-up where each individual bead of sweat is visible on an athlete’s face, or the camera is so low and close to the soccer field that only players’ feet and the ball are in view.

Whatever your goals may be, before you go shooting pictures, take a moment to ask yourself what message you’re trying to convey? This will help you determine how you will want to adjust your technique to produce the photos you want to see.


Gadgets & Gizmos

A point and shoot camera with a decent zoom might do the trick in a pinch, but for high-quality sports photography, SLR and D-SLR cameras are a far better bargain. Your D-SLR camera lens should be as versatile as possible. I use a 55-200mm telephoto lens because it can bring you right up close to your subjects while creating a strong depth of field effect, where–in a perfect world–only your intended subject is in focus and the foreground and background are not. Ideally, my lens of choice would be a fully loaded 18-300mm lens (but then again, I’d also like to have money for things like food). A tripod is also handy to have when learning to ‘track’ your subjects smoothly, but can become a hindrance once you’re comfortable running around the field, court or pitch getting a diversity of shots.

When using a point and shoot camera, there is often a sports mode. This makes sense, because you can’t do much to a point and shoot manually. On your D-SLR, there is a similar dial that you can turn that will tell your camera to go fully automatic; all you have to do is click the shutter while it constantly adjusts your aperture, shutter speed, ISO, white balance and focus to give you the best image. False. Sport mode can yield good results, but it is by no means a reliable way to achieve the exact photos that you’re after. However, sport mode can serve as a proverbial lifejacket before you learn to swim with manual.

These are the three operating modes we'll be using: Manual 'M', Shutter Priority 'Tv' & Sport Mode (the little guy running).


Practice makes (pretty darn close to) perfect…

Pick a time before that big sporting event you want to cover, and practice taking action shots. First, use sport mode to get used to the scene. Get creative with your images; take some shots from ground level (my personal preference), others from standing height, and–if you can–find some higher ground (safely!) for a more aerial angle. Using a telephoto lens here will keep your subject the main focus of the shot, even if you are far away. As well, test out the single shot and continuous shooting functions, located on the left hand arrow of your navigator pad. Have some fun with it!

Clicking the left arrow pad will open up the drive mode screen.

Then, take some time to review your photos. Information about the shutter speed, aperture, and more is all recorded in the image, and is easily accessible both on the camera and in the image file once you’ve uploaded your shots. Look at the photos you have, and engage in some problem solving: What worked? What looked good? What worked, but didn’t look so good to you? How could you take the photo next time to make the image better?

With your notes in mind, move on to round two: Try taking pictures on shutter priority mode, often denoted as ‘S’ or ‘Tv’ on most D-SLRs. In sports photography, shutter speed is crucial. Crisp, or ‘frozen’, images require a high shutter speed, usually something upwards of 1/400s. You will need an even faster shutter speed if your subject is moving horizontally across your field of view. Keep in mind the fact that ideal shutter speeds differ between sports; for crisp images in soccer games, I like to use 1/640s, but when photographing bike riders, I prefer a 1/800s shutter speed. If you don’t want crisp images, and are going for some focused areas interspersed with motion blur, you’ll need to find a suitable lower shutter speed (I’ll come back to that in a moment).

Highlights can add an ethereal glow to your subjects if caught at the right angle. Play around with lighting to see what looks best for your sport and your own goals for your photos. I used a slightly lower shutter speed to get just an ounce of movement in the rugby ball as it falls into the player's hands (ISO 100, 79m lens, f/4.5 aperture, 1/320s shutter speed).

After you’ve conducted the same review process with you shutter priority images, it’s time to go big or go home. Now, try your hand at full manual mode, or the ‘M’ dial. Now, you have control of your shutter speed (cranking the same dial you’ve been using on shutter priority mode) and your aperture (hold down the exposure button and crank the aforementioned dial simultaneously). If you wake up feeling bold, try taking your ISO off ‘AUTO’. If you wake up feeling like Chuck Norris, why not throw manual focus into the mix.

When in manual mode, hold down the 'Av +/-' button to highlight your aperture control. Still holding that button, crank the dial next to your shutter button to change your aperture.

By now, you should have a pretty good idea of what you do and do not like in your sports photos. Here are two of my personal favorite techniques.

Frozen in time
Clear, crisp shots are eye grabbing. When these types of images are well composed, and the timing is just right (remember to experiment with the continuous shooting function instead of just waiting for the perfect moment and possibly missing it), they look surreal. People appear Superman-like, suspended in flight. Flecks of dirt, grass, turf, snow, water, sand, or what have you, pepper the action scene in a way that could not be possible without the wildly high shutter speed you just used.

But what if the light isn’t very good where you’re shooting? You’ve cranked your ISO right up as high as it will go and your aperture is low, but you’re afraid that the images are turning out too dark at high shutter speeds. Sure, you’re getting that crispness, but all that detail can be lost in an underexposed image. For me, this is where sports photography gets really fun.

An example of 'freezing' the action in a soccer game, even though you can still see that both people and clothing are in motion (ISO 800, 250mm lens, f/5.6 aperture, 1/640s shutter speed).


Faster than a speeding bullet
Take a moment to think of Superman, or any ultra-speedy character of your choice. An iconic image of a fast moving-hero or heroine is a downtown city core in perfect focus, while a colorful blur represents the superhero. This isn’t the effect you usually want in sports photography. Instead of having a clear background and a blurry target, you want to have a blurry background that and a clear target. This effect can be achieved by learning to track your subjects through your camera. It takes some getting used to because, again, the speeds you’ll need to move your camera at will vary from sport to sport. The lower your shutter speed, the more of a motion blur effect you will get. Be careful–if your shutter speed is too slow, no matter how good you are at tracking your subject through the lens, the shutter will never be able to capture any part of the chosen athlete in focus. I like to work with anything from 1/50s to 1/125s, which brings us to the topic of light.

Perhaps not faster than a speeding bullet, but this shot still took many tries to track the rider and get his face in focus (ISO 800, 18mm lens, f/3.5 aperture, 1/125s shutter speed).


Lighting the scene

Light is important in photography in general, but even more so in sports photography. If you can photograph an event when it’s a bright but overcast day, it will diffuse the light, reduce the likelihood of glare on your subjects, but the shot will still look crisp. That being said, sometimes a  softer glare can add a very dramatic edge to your photo.

If the scene is just too dark, you may very well have to sacrifice clarity and use the Superman method, and this can yield some very cool results. When you’re playing with motion blur, don’t sit and wait for the perfect shot. Take advantage of the continuous shooting function, and just keep snapping pictures. With any luck, there will be a handful of images that come out well, so don’t be discouraged if the majority of your images are too blurry and unfocused.

An example of frustrating low-light photography. Similar to the image of a biker above, this shot was taken after many tries using continuous shooting and different styles of tracking the rugby players, including panning the camera and running alongside the play (ISO 800, 96mm lens, f/5.0 aperture, 1/50s shutter speed).


Final words of wisdom

Sports photography is exciting stuff. As the game or event ramps up in energy, I often find that my photo-taking technique follows likewise. But no matter how crazy it gets, remember to check your settings–and your images–every so often. You could think you’re getting the best shots of the winning goal when the light on the scene suddenly changes without you noticing. When you review the pictures later, they’re all horribly overexposed. Don’t be that guy or gal–check as you go, and keep tabs on your camera settings!

A tip for using the continuous shooting function: depending on how shallow your depth of field is, and the direction your subject is moving relative to the camera, continuous shooting mode (especially at a high shutter speed) does not allow the camera to refocus between shots. If you’re being brave and using manual focus, this will be less of a problem for you; nonetheless your refocusing reaction times will have to be quick.


A hilarious example of the moments that you can capture in sports photography that you might otherwise miss (ISO 100, 194mm lens, f/5.6 aperture, 1/400s shutter speed).
Finally, make mistakes. Make lots. The more mistakes you make, the more you’ll learn, and the more you’ll want to keep taking photos. The more photos you take, the less you’ll find yourself making mistakes (eventually!). Whatever it is that drives you to take action photos, be it your buddy’s touch football games, your niece’s softball tournaments, or your dog’s adventures with a tennis ball, make sure that your camera is with you… and your camera’s battery.

5 Points to Using Creative Studio Light w/ photos

5 Points to Using Creative Studio Light

By Alexis Steer





Playing with studio lights is one of the many benefits of being a photographer.  Most studio lights are used to create nice photographs of people so that they then can send to friends and family, like graduation photos or a studio photo session with a local photographer.  However, the studio lights have so much more potential.  How you ever wondered how you could take a beautiful portrait but make it look different then all the other portraits you have seen? Well if so, you have come to the right place.  Portrait photographers like Yousuf Karsh do an amazing example of perfectly lit photography but photographers like Man Ray manipulated light to make his photographs more compelling.  These are 5 steps to change your ordinary studio lights into compelling rays of particles accenting the most beautiful features of a human. 

Supplies:
-       Black Backdrop [can be a blanket but something a bit thicker works better]
-       Fill light
-       Hair light
-       External flash
-       Camera [obviously]
-        Tripod if you cant keep the camera steady


1: Standard Lighting Set Up

Assuming most of you who read this are in-fact photographers who use studio, some may be unfamiliar, so let me explain what a normal studio light set up looks like.  Here in my set up I have three lights, four if you include the flash on my own camera. The first one on the left is the fill light.  This light reduces the contrast from the large flash so there are no harsh shadows.  The second light use is called the hair light; this is used behind the model to create a separation between the person and the background.  The third light is the flash, and for all my photographs the flash is dulled down to a more minimum setting.  To set up the perfect portrait with the proper light the model has to stand in a position where the lights hits them at all the right angle.  This is something as a photographer you need to learn yourself, and for the best bet trial and error is the easiest and most efficient way to learn. Remember the most important part about portraiture is the connection with the subject’s eyes, ALWAYS make sure that the eyes are in-focus. 



The photo above is the standard light set up I used. Below is the result. 





2: Back- lit set up.

Once you have gotten the standard set up down you can now be creative.  Creative lighting in portraiture allows photographers to differentiate themselves and receive unique photographs. This portrait I took only used the hair light and the fill light.  Because I took these photos at night and my fill light was at a lower setting then usual I did not have to use a soft box.  A soft box is used when the light coming from the fill light is too intense.  Here I set both of the lights behind my subject to create a silhouette I used the fill light at her head and the hair light for the rest of her body, but I had the hair light tilted up with the barn doors on.  Barn doors are used the direct the light from the hair light to different angles.  I had to arrange myself as a photographer to make sure I did not get any direct light into my camera. Again, this is something you must learn from trial and error.

         Above is the back lit set up. Note how the barn doors are used to direct the light.  Below is the result. 



3: Upper and Lower Light Set Up

This picture is used with a combination of both lower and upper lighting.  Usually light that comes from below a subject is unflattering, but when paired with a light from above the picture can turn out beautiful.  Due to my make shift set, I had to get my subject to crouch above one light and strategically below the other.  The difficult part about this set up is that there is light coming from below and above and you don’t want to get the direct light in your frame because you may get some glare. I used the barn doors on the above light to direct the light proportionately on the subject.  I moved to lights around a little bit until I ended up with the photograph I liked. Some of my other shots, like I said earlier, can make the subject look very unflattering or give them a creepy look effect. 


                                              Below is the set up used to receive the produce above. 



 4: Front Light Set Up

This photo was taken with a front-lit fill light.  I wanted to play around with the contrast between the lights and darks and you can do this my overloading light to one side.  During the day when the room is a little less dark [even though the blinds should be closed and all the lights are off] you can use a soft box on the light to make the light less direct. However, this photo was taken late at night in a pitch-black room, therefore, I used the fill light without any soft box to intensify the light. When using these lights, I found that the photo turned out better when I adjusted the light settings in my camera, for example when this photo was taken my light settings were on tungsten.  It allowed the pictures to turn out less orangey-yellow and created a more natural look to the skin color and light.  The light was about a foot and a half away from her face, which creates the dark contrast.  If it were farther away, the light would have been a lot softer. 

 Above is the result.  Below is the set up.  Note that I only used one light for this photograph.   I did NOT use the hair light. 




5: Double Side Light Set Up 


This last photo was taken with a back and front to the left-lit light.  Using the fill light, I placed it about two feet behind my subject, to create a glow on her shaven head.  I then placed the hair light to the front of her angled a little to the left to create almost more of a back lit light but also front lit.  I wanted to extenuate her newly shaven head.  In most cases having eye connection with the camera is key and powerful, however for this photograph the need to see the eyes and have that connection is not need, because the main focus is not her face. 

 This looks like the set up before but both lights were used in this picture.  Below is the result, note home both sides of her head are lit up. 



Once you master the creative light in the studio, upload your photos in Lightroom and play around.  In the photos posted here today, I have edited them to what I see makes the photo the best it can be.  I mainly play with contrast and changing my photos to black and white in Lightroom.  Again, the best way you can learn to become a master at anything in photography is trial and error.  See what works for you and explore it. 




BLACK AND WHITE PHOTOGRAPHY



A HOW TO

BLACK AND WHITE PHOTOGRAPHY
How to get the results
Oscar Bonilla JR


NOTE: DUE TO FORMATTING ISSUES, COVER IMAGE AND EXAMPLE IMAGES CANNOt be UPlOADED SINCE THEY ARE STACKED PDF IMAGES. TO SEE THESE IMGES,  TAKE A  LOOK AT BONILLA JR IN DROP BOX.
THANKS & HAVE A GOOD BLOCK BREAK.

There’s something extremely intimate about black and white  (B&W) photography. Personally, I believe that B&W photography tells a more embracing story, especially in portraiture shots. Don’t get me wrong, color photography is remarkable, and can tell a very vivid and rich story. Though, my heart and personal taste goes into the effect that B&W creates for a photograph. Having been in a photography class this month, I have found some good ways in capturing B&W photos through the process of trial and error that I would like to share. This is a How to form on how to get the results.

To begin, its important to state, that with advanced editing tools as Light Room and Photo Shop, pictures that are originally colored and altered to become B&W is not true B&W photography (in my opinion). I will be writing on the processes that can be done within talking a B&W photo on a digital camera set on B&W parameters


When it comes to B&W photography, being able to ‘see’ how your final shot will look is essential. It’s a tricky thing at times especially since the view finder you are looking through is showing you what your eye actually sees; a world of color. In order to get the best results that you can, the photographer will have to look beyond the colors, and instead envision how the tones, textures, shapes will be presented through a  B&W photograph.

       In getting your camera prepared for capturing B&W photography (well in terms of a Cannon Rebel XT) hit your menu button and slide right until your highlighted scroll depicts an icon of a camera with the number 2. Once you are here, highlight your  scroll to the last setting, which says “Parameters”. In selecting parameters with your SET button, you will have the option of 5 different settings. Scroll through these options until getting to “B/W”. Select the B/W option, and you are now set to shoot away in beautiful B&W. For photographers that use a different type of camera, you can web search for specific settings on your camera, or through your cameras manual.
           
When starting, it would be a good idea to see what photos could potentially look like through converting colored photos to B&W with your editing program. In doing this, it will give you a sense of what looks good in B&W or what does not. Though, through my short experience of this class, some things that look great in B&W are textures (micro shots, photos of the chief and the texture of the massive rock/landscapes), tones (the fog spewing of the Squamish mountains is great for tones) strong lines and shapes (contrast is a big deal in B&W photography, so capturing simple solid lines or curves makes for a telling image), and last but not least portraiture shots(with the right contrast and exposure, the faces you pick to be your subject, will pop beautifully).
For the most part, you can never truly trust how your camera monitor shows the image you have captured. Connecting your digital camera to your laptop or your desktop can show you how your shot truly looks and of course gives you a larger monitor to look through. Besides this, once connecting your selected photos to your laptop/desktop, you can commence using editing tools to create an attractive image if need be.

Below are some examples of different editing forms you can do with your photos.




           
These images above are all different photos. The logistics for the first photo (far right) is: Exposure 1/20 sec at f/2.8 - Focal Length 70mm - ISO 200. The second photo (middle) is: Exposure - 1/200 sec at f 2.8 - Focal Length 42mm - ISO 800. And lastly, the 3rd photo (far left) logistics: Exposure - 1/250 sec at f /2.8 - Focal Length 42mm - IS0 1600. In the editing room for the first photo, the highlights were dramatized to =23 along with the exposure, contrast and clarity. This was done in order to give the photo a lightweight and softer look. In changing and messing around with the exposure, contrast, shadows, and clarity, a photo can become extremely soft (to the point where it becomes blurry) giving a calm B&W feel.
For the second photo I wanted to create something a little more dramatic, so the exposure and contrast were heightened. It also helped that this photos having my exposure 1/200 of a sec and having my ISO at 800. This allowed to have  less light into the shot, but having my ISO set high exposed this photo more. If I were to have a low ISO with the amount f exposure this photo has, it would have come out dark (though could have been edited lighter, like our next photo has).
This photo was originally darker because of its settings, though through editing it, the photo came to give a darker/dirtier truth to it. The intentions for this photo were to bump up the clarity to really see the definition of the hand and the textures. The shadows and highlights were adjusted to bring this image out more, and would suggest so in getting this type of effect. This photo is a good example to not get discouraged if you feel your getting to black of photos. The editing programs can be very helpful, in creating either a softer image or rougher one.

            It takes practice in getting the types of images you love. One has to know their camera well, and know what to do in certain situations such as light, movement, and more that can arise at any moment. In having this skill, one can create an image that speaks to its viewers and speak to your artistic intuition. I myself am still trying to figure out the gist of how to get an awesome photo, and it will come to me (hopefully) with more time shooting away at subjects.

            Below are 5 B&W shots that I took with the editing keys mentioned above. Overall I focused on texture and tones.  If you are further interested into looking into B&W photography or maybe need a sense of inspiration, take a look at work from Robert Frank, Henri Bresson, Diana Arbus, Elliott Eswitt and Gilles Peress, whom all take photos in B&W and do it in such a story telling and elegant manner.
Also there are many reliable sources for question on B&W photography that you can see through web blogs and videos. One video if you have the chance to watch is: https://www.youtube.com/watch?v=rozoadi0xYc . It talks about what you should do in taking B&W photography, especially for portraits and editing.






Capture what you see














     
















Tuesday, 25 March 2014

How to Take Almost-Good Bug Photos with Minimal Equipment

Bugs are amazing creatures. I especially wanted to take photos of bees because some beautiful bee photos have been showing up on the internet and I wanted to learn how to make my own. This tutorial is an exploration of macro and photo stacking techniques using minimal equipment. I had a lot of difficulty with my camera; I really need a macro lens to get proper photos. However, I had fun making the light box and playing around with lighting. We got the most detailed shots with Trevor's extension tube and an off-camera flash. If I had more time I would have loved to take more of these high-definition photos properly and stack them. Here is a a general overview of what it takes to create professional stacked bee photos. 

Bumblebee taken with extension lens with external flash without a light box.

Here is a photo of the setup I was working with in the beginning: 
My makeshift light box, with black backdrop about 6 inches from the box and a platform for the bee with a clay base. 
Lighting:
The ideal lighting situation places the subject on a platform in a light box. A flash is placed under the box and directed towards the ceiling. I made a light box out of a cardboard box lined with white paper. A hole is cut in the front of the box to let the camera lens in, and a hole is cut in the back to expose a black backdrop outside of the light box. The most common backdrop is made of black velvet or felt since these materials absorb light. I used the black side of a foam mounting board.

I experimented with myriad light sources. I tried a few headlamps directed at the ceiling of the box, but that made the bee “glow”. 
Bee glow problem using headlamp lighting. 
I tried using my in-camera flash, but that made the bee’s legs shiny, which maybe isn't a huge problem and could be remedied in Lightroom. 
Bee shine problem using in-camera flash. 
I tried directing my in-camera flash toward the ceiling of the box, but that didn’t provide enough light on the subject. I tried diffusing the flash with a piece of white tissue paper, and that seemed to light the bee better. In conjunction with natural light from the window, this made for the best bee photos I took with my camera. 
My best non-shiny bee photo using diffused in-camera flash and natural light. Perhaps a bit too fuzzy. 
With Trevor's extension tube and flash we were able to get good photos with and without the light box, and we removed the white paper under the subject platform as it was contributing a white haze to the images. 

Shutter Speed:
Ideally, a quick shutter speed to freeze the bug is ideal to eliminate any motion blur from minute vibrations. The experts recommend a speed of 1/70 to 1/125s. When the flash was on, my camera would only go to 1/160s, but a faster shutter speed with an off-camera flash may get crisper images since I was battling with other variables that affected the quality of my images. Recommended flash speed is 1/8s to 1/16s. I couldn't change the length of my flash so I didn't bother with this parameter. 

Aperture:
At first I thought the largest aperture my lens was capable of would be best for getting tiny slices of the bee in focus at a time. However, the bee photo experts recommend an aperture of 5.6 or a bit higher. I set my aperture to 5.6 and zoomed in on the bee, which made my best images.

ISO:
The bee experts recommend an ISO of around 200 to 250. The best images I took had ISO’s of 400.

Vibration Reduction:
The key to getting clear images is having a solid workspace. Having a counter that is attached to the ground is ideal, but you can also weight down a table with heavy weights to minimize wobbling. I ended up setting up everything on the floor to minimize vibrations from the table. Mounting your camera to a piece of wood or using a tripod can help to stabilize the camera. A shutter remote will also reduce camera shake introduced from pressing the shutter. I tried using a gorilla pod and setting the shutter on a timer.

Lens:
A macro lens would be ideal for this project. Inverting the lens or using extension tubes may also enable you to focus very close to the subject. I didn’t have a macro lens, and I couldn’t get the inverted lens to work, so I tried to make my kit lens work, without much success. Trevor's extension tube worked the best! 

Stacking Images:
To get all of the parts of the subject in focus in one photo multiple images are stacked using software. Several images are taken with the point of focus incrementally getting closer or moving farther away on the subject. The different focus points can be made by either moving the camera closer and farther away, or by focusing manually using the lens. Both techniques are said to work. To move the camera without refocusing, you can mount your camera on a piece of wood or on professional stack shot equipment and move it microns closer and further from your subject to get different focus points. I tried the refocus method. Once you have several images to work with you can upload them to stacking software. I used a trial of Helicon Focus to stack the images. It detects which areas of the images are in focus and puts them together, and can even compensate for slightly different compositions and other incongruities. One thing that I never figured out was how to ensure that all the photos in one stack were consistently focused in the right order. Helicon seemed to figure out the photos satisfactorily, though.

This moth was photographed 9 times with progressively farther focus points.
A moth with 9 different focus points.  
I then uploaded them to Helicon Focus and let the program do it’s magic. There is a bit of distortion on the edges of the moth, but it worked to get the whole moth mostly in focus! 

A stacked image of a moth made using Helicon Focus. 
Subjects:

With such tiny subjects, it is essential that they are clean and dust free. Bees can be washed with soap and water and then dried to make them clean. (I didn't do this.) Tiny subjects are hard to focus on, and are especially difficult to get multiple focus points off of. I had greater success with using a large moth to photograph since I could focus on different areas easier. With Trevor's camera, I think the smallest bugs made for the best photos because more was in focus, but neat effects were obtained by taking some close up glamour shots of this beetle. 

June bug taken with extension lens in light box. 
With more time and better equipment (and more money....macro lenses are not cheap!), I hope to be able to take better quality images and stack them to look like this: 
Professional photo of a carpenter bee to aspire to. Taken by Sam Droege.